Michigan Wind Power Map: Image Source: State of MichiganA proposed 21st Century Renewable Energy Plan was introduced last week for the state of Michigan. This is something that the state badly needs. Other states have been pushing forward programs to develop their energy efficiency and renewability, such as the Million Solar Roofs in California, or the western states' "Transitioning the West to Clean Energy and Energy Security." As I mentioned earlier, Michigan, with it's present building code, has one of the worst energy standards in the country. One aspect of this new legislative proposal is to "promote energy conservation through updated construction codes and consumer tax credits for energy-efficient appliances."
The key elements of the plan:
I had the chance to learn more about evaluating home energy efficiency at a seminar about energy rating for homes. This is particulary valuable here in the State of Michigan because Michigan is in the bottom 5 states for energy efficiency in home construction. According to the EPA, only Hawaii is worse than Michigan. There is new legislation being introduced in the state to address some of these issues (which I will be writing about shortly), but, at present, the state requirements are very lax, and saying that a house meets the building code for energy doesn't mean all that much.
Production homebuilders would rather save a few hundred dollars so that they can keep their costs low and sell homes at the lowest price they can. They are unconcerned about the operating cost of the home, and many homebuyers are following them and only asking about the seling price. The cost of this negligence arrives in high energy bills for these homes, which buyers must deal with year after year.
But, there are some federal incentives that encourage the building of more efficient homes. The Energy Policy Act of 2005 includes a $2000 credit (not just a deduction) for home builders for the construction of a home that meets energy efficiency targets. (The deadline on the Energy Act is presently January 1, 2008, but it is expected to be extended by Congress very shortly.) "Home builders are eligible for a $2,000 tax credit for a new energy efficient home that achieves 50 percent energy savings for heating and cooling over the 2004 International Energy Conservation Code (IECC) and supplements. At least 1/5 of the energy savings must come from building envelope improvements." — (EnergyStar link)
This is part 2 of my series of posts about visiting GM Headquarters in Detroit for the ChallengeX program and to meet with some GM executives. I attended this event representing both GreenOptions.com and EcoGeek.org, and these articles are cross-posted to both sites. Previous story here.
Several of the vehicles were available to be driven at the ChallengeX event. Of the vehicles that were there, I was most interested in driving the University of Waterloo's entry. Most of the teams (12 of the 17 competitors) were using a B20 biodiesel blend as their fuel and all but one of the others used some form of internal combustion with E85 ethanol or reformulated gasoline. But the University of Waterloo team took a different approach.
The Waterloo vehicle was powered by a hydrogen fuel cell (with onboard batteries for backup) and propelled by front and rear electric motors. When I sat down behind the wheel, my guide from the Waterloo team explained that some of the things in the vehicle that are different from the way we're used to driving a car. There were a number of different sounds, coming from the front and the rear, as various systems came online to start the fuel cell system in operation. Matt Stevens from the Waterloo team explained the whole sequence of operation to me this way:
Photo Credit: Silicon Solar Inc.We are pretty familiar with most of the ways solar energy is collected. There are photovoltaic panels (PV) which directly convert sunlight into electricity. Solar hot water systems are another widely known system. Water circulates through a series of tubes or through a pipe to be heated by sunlight. And solar concentrators use mirrors to focus sunlight on a narrow area, either for direct heating, or to boil water to make steam for electrical generating purposes.
Evacuated tube heaters are another method of collecting solar energy. Rather than running the water through a long circuitous course, each tube is a separate heat collector. It is made of a clear glass cylinder which allows sunlight to pass through, and a central heat collector tube. The evacuated tube insulates the collector element, which makes it more efficient in colder environments. The collector itself is typically filled with an antifreeze mix rather than just water. The top of the tube has a heat exchange element which is prevents contamination of the water being heated. The tubes are collected together in an array, with a manifold across the tops, containing the heat exchangers.
Wiliam Kemp has written two books on renewable power and off-grid systems for homes, $mart Power (2004) and The Renewable Energy Handbook (2005). (Smart Power actually uses a dollar sign for the S in the title.) These two books are largely a first and second edition of the same text, with the second edition being expanded with several new chapters and additional information.
Both of Kemp's books are comprehensive volumes. He addresses a range of alternate power generating options. There are chapters on photovoltaic (PV), wind, biomass, and micro hydro. More than just discussing the technical aspects of the generating systems, he also covers efficiency, interconection, "Heating and Cooling with Renewable Energy," "Living with Renewable Energy," and the other issues surrounding having a home with renewable systems. He also has a section about making biodiesel and another section about eco-pools (naturally-, rather than chemically-filtered swimming pool systems) and solar heated pools and hot tubs.
The Renewable Energy Handbook and $mart Power both go into some depth about renewable energy systems. Kemp shows all aspects of the various systems, dealing with hardware installation, electrical connection, and the range of what is necessary to install any of the systems he discusses. While I would not rely solely on these books for direction about installing a PV system or a wind turbine, it does provide a greater depth of information. A homeowner can get a better sense of the scope of work required for installing a renewable system, and have a better idea about what is involved, and whether or not it is something they want to take on.
Image Source: AISO.netPower needs are a growing concern for information technology (IT) needs. A server rack can now draw as much as 30,000 watts. As those servers work, all that energy is turned into heat, and in addition to the energy needed to operate those servers, all of that heat needs to be dealt with or else the electronics will overheat and fail. So data centers are huge consumers of energy, and their demands are increasing.
There are some steps that can be taken. A number of hosting service providers purchase renewable energy credits (RECs) to improve their green presence. And that's a good step, particularly for services that can't directly use renewable energy. But one company takes their commitment to the environment several steps further. They are even the only commercial data services provider that is also a member of the U.S. Green Building Council (USGBC). And this has also landed them on Inc. Magazine's Top 50 Green Companies.
Affordable Internet Services Online (AISO.net) environmental concern extends from their solar power array, which provides 100% of their electrical needs, to the construction of their data center building. The facility is powered by an array of 125 on-site solar panels which power the servers and switches, as well as building lighting and air conditioning, with battery storage for nighttime operation. The facility also has a backup generator and a grid connection, but has only used the latter to sell excess power back to the utility.
Photo Credit: Univ of Alberta Creative ServicesNext to bulding heating and cooling, water heaters are the largest energy consumers in most homes. But, with a conventional water heater, much of the energy is spent on keeping the heated water from cooling off while it sits, waiting to be used. Tankless water heaters don't have these standby losses, and can be a much more efficient choice in some circumstances.
Tankless water heaters have no hot water storage (hence tankless), but can quickly raise water temperature by as much as 50 degrees F (~30 degrees C). They can do this with a flow rate ranging from 4 gallons per minute (GPM) to as much as 9 GPM. Tankless heaters are also much smaller than conventional water tank heaters, which can be a consideration for smaller homes where space is at a premium.
Depending on usage patterns, a tankless water heater can provide hot water much more efficiently than a regular tank heater. One manufacturer's information lists an annual operating cost (based on 2004 prices) of $166 for their tankless heater versus $210 for a conventional natural gas water heater, and propane and electric conventional heaters are even more expensive to operate.
There are lots of electronic devices people use, and a large number of them are powered by batteries. Various music players, remote controls, and if you have kids, all manner of electric toys. And, if you are using alkaline batteries in these devices, you are probably going through lots of batteries.
What do you mean, wood burning can be green?
In fact, masonry heaters (which are also sometimes called "Finnish heaters" or "Russian heaters") can be a green source for heating a home. While a traditional fireplace may be only 10% efficient (which is to say not!), a masonry heater can be 90% efficient. A well insulated house (even in a cold, Canadian location) can be heated on a single cord of wood per season. In a sense, a masonry heater is to a traditional fireplace what a compact fluorescent (or, even better, and LED light) is to an incandescent bulb.
Heliotube: Photo source: Practical InstrumentsSilicon solar cells are a pretty established technology. The panels have become more or less standardized to a regular form factor so that installers can use the same mounting hardware regardless of whose panels are being used. Big corporations like Wal-Mart and Google are readying large installations of panels that will produce enough electricity to rival a small power plant. Manufacturers are developing the technology, and new models of solar panels regularly outperform their older cousins by squeezing out a few more watts per square foot.
The silicon portion is still the most expensive portion of the photovoltaic (PV) solar panel, however. So a new solar panel that uses 88% less PV material than traditional panels could help cut the cost of going solar.
Co-generation is a systems approach for producing poth power and heat. Combined heat-and-power (CHP) plants produce electrical power, and use the heat from that production to also provide heat to local buildings (often through underground steam or hot-water piping systems). These systems have been most often found at hospitals and universities, where a large number of buildings can be efficiently served by a combined facility such as this. But new systems are bringing this same technology into the home.
Micro-CHP units are new to the US, with the first installations just beginning in the northeast. The technology for these units is not brand new, however. There are more than 30,000 homes with these units installed in Japan, where the gas utilities have been promoting them. In Britain, 80,000 under-counter micro-CHP systems are on their way and will be installed in the coming years.
<p><img src="/files/images/powerhouse.jpg" border="0" alt="power house" width="155" height="151" />There are many factors that contribute to greening a building. Of these, energy is an extremely important part of the equation. The <a href="http://www.usgbc.org/" title="USGBC">US Green Building Council</a> (USGBC) recognized this fact when they named their green building program LEED: Leadership in Energy and Environmental Design.<br /><br />Energy costs can be a surprisingly large part of the cost of owning and operating a building. </p>
How reasonable is it to try to generate your own power? You want to take that big, green step, but there are a lot of unknowns. Is it hard to do? Does it take a lot of equipment? Will the systems last? What is the best system to use for your location?
I can't give you simple, easy answers to most of these questions, since there are too many factors, and it's not a one-size-fits-all kind of question. However, there is one question I can answer: Is it worth considering a renewable generating system? The answer to that is 'yes.'