What's In This Article
Water filtration systems are important because they remove harmful contaminants from drinking water.
They also reduce the amount of chlorine added to drinking water, which can cause health problems.
There are three main types of water filters: point-of-use (POU), whole house, and central. POU filters are installed at the faucet or sink where water comes out.
Whole house filters fit into the kitchen and bathroom sinks. Central filters are mounted in the basement or garage. Each type has its advantages and disadvantages.
A well water filter system uses a combination of these different types.
Point-of-use (or “point”) water filters use cartridges that contain granular activated carbon (GAC) to remove impurities such as lead, arsenic, mercury, nitrate, pesticides, herbicides, radon, bacteria, viruses, heavy metals, and other chemicals.
The GAC is placed inside a cartridge that fits over the end of the faucet.
This type of filter is inexpensive but does not remove all pollutants. It is designed for occasional use rather than long-term usage.
Whole house filters have been used for many years.
These filters are typically large tanks with a pump that moves water through a series of chambers filled with various materials including sand, charcoal, zeolite, and ion exchange resin.
The tank sits on top of the water heater. Some models include an ultraviolet light source to kill bacteria and parasites.
Whole-house filters are effective at removing most contaminants.
However, they require frequent maintenance and replacement of parts. If you plan to drink your filtered water, it must be tested regularly for quality.
Filters need to be replaced every two years. These kinds of filters are used for wells the most.
Central systems are more expensive than point-of-use or whole house filters. They provide better filtering and longer life expectancy.
They are usually found in homes built before 1990. Central systems work by passing water through a series of filters.
The first filter removes particulate matter and sediment.
The second filter removes organic compounds and disinfects the water using ultraviolet light. The third filter removes heavy metals like lead and zinc.
The fourth filter removes radioactive elements. The fifth filter removes dissolved gasses like nitrogen and oxygen. The sixth filter removes microorganisms.
The seventh filter adds minerals back to the water. The eighth filter removes any remaining particles.
The following water filtration systems that we’ve reviewed are variations of these three. The products are all designed to work in a well and filter water to the cleanest it can be.
Max Water 400 GPD Commercial RO System
Max Water specializes in water filtration systems.
Their systems are made from high-quality materials and engineered to last. Max Water 400 GPD Commercial RO System is one of their best-selling products.
It includes everything needed except the iron filter itself. The entire unit is portable so you can take it anywhere. You simply hook up the included hose and fill the reservoir.
Then let the filter do its job!
This Max Water filtration system is specifically designed for wells and homes. It’s economically and environmentally friendly in its design.
This filtration system is also designed to deal with contaminants such as manganese, iron, sulfur, or any others, effectively.
The result is that it will leave behind some of the purest water you’ve ever tasted.
Max Water have considered filtration upkeep. This filter is very easy to clean and won’t stain.
One issue you get with water filtration systems is that they can affect the water pressure of the well, but Max Water guarantees 0 drop in the original water pressure.
Moreover, this filter comes with separate, available-to-purchase upgrades. These upgrades include things like a reverse osmosis drinking system and a UV water purification system.
Though these upgrades, along with the filter itself, do come to a very hefty price tag.
However, Max Water has such strong faith in their filter that they’ve given it a lifetime warranty. We’d argue that’s well worth the money.
Pros
- Optional upgrades that will improve the filter
- Environmentally and economically friendly
- Lifetime warranty so it’s virtually risk-free
- Excellent at removing contaminants
- Very easy to clean because it’s stain-free
- There won’t be a drop in water pressure
Cons
- Very expensive
PUREPLUS Whole House Water Filter
PUREPLUS makes an excellent quality water filter. It’s affordable and effective. It does not require electricity to operate.
PUREPLUS uses a carbon block to remove impurities from your water. Carbon blocks are porous and absorb unwanted chemicals and impurities.
PUREPLUS designed this water filter to specifically remove turbidity. Turbidity refers to how cloudy water is. Water that has a lot of turbidities is very cloudy.
It’s hard to see through. That means there may be something wrong with the water.
For example, if there’s too much sediment in the water, then it’ll cause turbidity. If there are too many particles floating around, the more cloudy the liquid will appear.
The 3 stage filtration used by PUREPLUS removes these particles. This means that your water will become clearer. It’ll look cleaner and feel better to drink.
PUREPLUS filters are easy to use. Simply attach the included hoses to the filter and connect them to your well faucet. Fill the reservoir with tap water. Let it run for about 15 minutes.
Once it’s done running, it’s ready to use.
If you want to make sure your water stays clear, then you should change out the cartridge every 6 months. It’s not the best option for people who live in areas where the water is heavily chlorinated.
Pros
- More affordable than other filters
- Turbidity reductions mean you’ll have clearer water
- Easy to use
- Safe to consume
Cons
- Cartridges only have a life of 6 months
AFWFilters Heavy Duty Filtration System
The AFWFilters Heavy-Duty Filtration system is efficient in how it works. It uses a continuous filtration to remove contaminants.
Designed to be a heavy-duty filtration system, this little filter could clean the water supply of a whole apartment block without batting an eye.
One of the contaminants that it’s excellent at removing is hydrogen sulfide. Hydrogen sulfide is responsible for that rotten egg smell. The injection system eradicates this smell permanently.
This system also uses a smart valve. This smart valve can connect to an app on your smartphone using Bluetooth. Using this you can set the time of regeneration, time of day, and backwash frequency.
This filter uses a 9-volt battery and is constantly monitoring its battery life. You can also precision-tune this filter so it’s specific to your well.
The Pump Control Module is built into a Peristaltic Pump.
A Peristaltic Pump is a type of pump that pumps fluid as long as its tube is moving over a fixed surface. As the tube moves over the fixed surface, it pushes the liquid forward.
The Peristaltic Pump moves the liquid through the entire filter. The filter itself consists of two chambers separated by a membrane.
When the liquid enters one chamber, it passes through the membrane into the second chamber.
There, the liquid flows through a series of granular media beds. These beds are made up of activated carbon. Activated carbon is a form of carbon that has been chemically treated.
It’s been processed so that it has a large number of pores. These pores allow the carbon to absorb molecules such as sulfur compounds.
Once the carbon has absorbed all of the sulfur compounds, the liquid exits the carbon bed and goes back into the first chamber. Here, the liquid flows through another carbon bed.
This process repeats until the liquid reaches the end of the filter. At the end of the filter, the liquid flows into a holding tank. From there, it’s pumped to your well.
That’s what makes this pump so effective.
Pros
- Removes hydrogen sulfide
- Permanent odor removal
- Easy to install
- No need to replace cartridges
Cons
- Expensive
- Doesn’t work well if your well is hard to access
- Requires regular maintenance
Pelican PC1000
The Pelican Water filter is a whole house water filtration system. It’s designed specifically for homes with multiple bathrooms.
It features a reverse osmosis unit that removes chlorine and other impurities from your drinking water. It also includes a UV light disinfection unit that kills bacteria and viruses.
It comes with everything you’ll need to get started. This includes a pre-filter cartridge, the main filter cartridge, a flow control knob, a pressure gauge, and installation instructions.
All you have to do is add tap water and attach the filters to your faucet.
This Pelican filter also includes a 5-micron sediment pre-filter. What this does is filter out bigger bits of dirt. That makes this perfect for outdoor wells.
It also protects the filter from clogging and helps it to last longer. This filter is designed to last for at least 1,000,000 gallons.
This filter utilizes high-grade catalytic granular coconut shell carbon to provide the purest filtration and remove even the broadest of contaminants. The result is that this will give you the purest and softest water to drink.
Pros
- High-quality filtration
- Long-lasting, for at least 1,000,000 gallons
- 5-micron pre-sediment filters mean it will last very long and give very pure results.
Cons
- The media priming requires more attention and focus when setting up.
Home Master 3 Stage Filtration System
If you’re looking for a whole house water filter that can improve the quality of your water while saving you money, then the Home Master 3 Stage Sedimental Iron and Carbon Filter is the best option available.
The Home Master 3 stage sediment iron and carbon filter is an excellent choice for those who want to improve their home water quality.
With its three stages, this filter can remove almost any type of harmful substance in your water.
In the first stage, the filter uses activated charcoal to absorb heavy metals like lead or mercury. In the second stage, the filter uses ion exchange resin to remove chlorine and chloramine.
Finally, the third stage uses a combination of active carbon and iron to remove residual chemicals.
The Home Master 3 Stage Sediment Iron and Carbon Filter is easy to use.
You just fill the reservoir with tap water and let it run through the entire filter. Then, once the filter is full, simply turn off the spigot and enjoy clean, fresh, water.
The Home Master 3 Stage Sediment Iron and Carbon Filter has a lifetime warranty on all parts.
If anything goes wrong with the filter, they’ll replace it free of charge. They also offer a 30-day money-back guarantee if you are not satisfied with the product.
Pros
- Removes almost any type of harmful substances in your water
- Lifetime warranty on all parts
- 30-day money-back guarantee if unsatisfied
- Easy to use
Cons
- It may require some maintenance
- Not recommended for hard water areas
3M Aquapure Ap903
The 3M Aquapure AP903 Whole House Filtration System is one of our top picks because of how affordable it is. But there’s so much more to love about this unit than price alone.
First of all, it comes with everything you need to install it yourself. So you don’t have to worry about buying extra equipment.
And since it comes with a 10-year warranty, you know you’ll be covered no matter what happens.
It’s also super easy to set up. All you do is plug it into the wall and connect it to your faucet using the included adapter. After that, you’re ready to start filtering your water.
And when it comes to filtration, the 3M Aquapure has some pretty impressive specs. The pre-filters help remove bad tastes and odors from your drinking water.
Then, the 5-micron prefilter helps remove bigger particles out of your water.
Finally, the 1-micron post-filter helps remove even smaller particles from your water. This means you get cleaner and clearer tasting water every time you take a drink.
All in all, the 3M Aquapure AP903 Whole House Filtering System is an excellent choice for anyone looking for a simple, effective way to improve the quality of their water.
Pros
- Simple installation
- Affordable
- Includes everything you need to install
- Consumes less energy than other units
- Easy to maintain
- Lifetime warranty on all parts
- No chemical taste or odor added for a purer taste
Cons
- It may require some maintenance
- Not recommended for hard water areas
Express Water 3 Stage Filter
The Express Water 3 Stage Filter is another great option for those who want to upgrade their current well water filtration system.
It includes two pre-filters, a carbon block filter, and a UV light sterilizer.
This unit can handle most types of water including city water, well water, and spring water. Though it was designed specifically for home use, it’s an excellent well filter.
But what makes it stand out above others is its ease of use.
Simply fill the reservoir with tap or bottled water, attach the hose to the spigot, and then let it run through the filters.
Once the filters are filled, you can stop running water and enjoy clear, healthy H2O.
You can also adjust the flow rate by turning the dial on the side of the tank. There’s also a built-in shutoff valve if you ever accidentally leave the tank unattended.
This filter works in 3 stages. The first stage removes bigger particles using sediment pre-filter traps. Then, the second stage removes the chlorine taste and odor.
It does this by using activated carbon filter blocks.
Finally, the third stage uses a carbon-KDF filter. This removes heavier metals like iron or chromium and other contaminant chemicals.
The KDF filter is the last stage of filtration and helps to fight bacteria and viruses, leaving you with the purest well water.
In addition to these features, the Express Water 3 Stage Filter has a lifetime warranty on all components.
That means you can rest assured knowing that any problems will be fixed free of charge.
If you’re interested in upgrading your current well water filtration system, the Express Water 3 Stages Filter could be just what you need.
Pros
- Ease of use
- Works with many different types of water
- Consistent performance
- Lifetime warranty
Cons
- Expensive
- Requires regular cleaning which can add to maintenance costs
iSpring WGB32B Big Blue
The iSpring WGB32BB Big Blue Whole House Well Filtration System is one of our best sellers. It’s designed to remove a wide variety of contaminants from your drinking water.
It includes three separate stages of filtration. The first stage uses a sediment trap to remove large particles.
The second stage uses a carbon block filter to remove chlorine tastes and odors.
Finally, the third stage uses granular activated charcoal to remove heavy metals and other contaminants.
The iSpring WGB32B is one of the best whole house water filters available today. It’s made from durable ABS plastic and comes with a lifetime warranty.
It’s also affordable. But what sets this model apart is how easy it is to use.
This whole house well filter is easy to set up and operate.
All you have to do is connect the included hoses to the faucet and start filling the reservoir with tap or filtered water. You’ll notice that the water starts getting clearer as soon as you turn on
Once the reservoir is full, simply turn off the water and let the filter do its job.
If you have any questions about how to use this product, there’s a helpful instructional guide with the box.
The iSpring WG32B offers great value for money. It’s an excellent choice for anyone looking for reliable whole house water filtration.
Pros
- Affordable
- Easy to install
- Durable construction
- 3 Stages of filtering to ensure the best clean
Cons
- Replacement filters need to be bought which builds up costs over time
PRO-AQUA ELITE
The SoftPro IronMaster Whole House Water Filtration System is another popular option. It’s designed to provide high-quality drinking water at an affordable price.
It includes 5 stages of filtration. Pre-filter and post-filter and stages in between designed to remove as many contaminants as possible.
The pre-filter removes particulate matter, while the post-filter removes chlorine taste and odor.
The PRO-AQUA ELITE is a great whole house water filter. It’s made from sturdy stainless steel and comes with a lifetime guarantee.
It’s also very easy to use. Simply fill the reservoir with tap or bottled water and attach the included hoses.
Then turn on the unit and watch the water become crystal clear.
You don’t need to worry about replacing filters because they are reusable. Just replace them when they eventually get too clogged to use.
This whole house water filter provides exceptional quality at an affordable price. It’s an excellent option for those who want to enjoy clean tasting water without breaking the bank.
It uses air injectors to employ oxygen for better filtration.
This filtration system might be more expensive than others on the market, but that’s because it includes all the accessories you’ll need.
There’s no need to purchase any extra upgrades either. And as well as filtering out your water, the PRO-AQUA ELITE softens it in the process.
That makes it an excellent filter for areas with hard water.
And the best part is that all the filtration is automatic, so there’s no work on your part.
Pros
- Made from high-quality materials
- Stainless steel construction
- Reusable filters
- Lifetime warranty
- Softens water as it filters
Cons
- More expensive than other filters
Also available from iFilters
iSpring Whole House 3 Stage Filter
And we’re back with iSpring so quickly. For good reason too. iSpring makes damn good filters. The Springwell CF is no exception.
This whole house filter has been specially designed to give you the best possible results. It features three layers of filtration to ensure your water stays pure.
The first layer targets heavy metals and other larger bits of dirt. Next, it removes chlorine and chloramines. And finally, it removes bacteria and viruses.
If you’ve got a well in your backyard then you know just how important it is to keep it clean. This whole house filter will help you achieve that.
When you’re ready to change the filter cartridge, just pop it out and throw it away. There’s no need to disassemble anything.
The iSpring Whole House 3 Stage Filter is one of the most effective whole house water filters around. It’s built to last and gives you years of trouble-free service.
Moreover, this filter also comes with the option for additional upgrades.
Though they do cost extra. These upgrades include a reverse osmosis drinking system. Without the upgrades, the original filter works effectively. Moreover, it’s incredibly affordable.
With their lifetime limited warranty, you’ll never have to worry about replacement costs. You can rest assured knowing that if something goes wrong, you’ll be covered.
Pros
- Highly efficient
- Easy to install
- Lifetime warranty
- 3 Stage filtration for the best clean
- Additional extra can improve the filter
Cons
- Additional extras cost a lot more
- Very expensive overall
Also available from Overstock
There you have it. These are the top 10 best well water filter systems that are currently on the market.
Any of these would work great, but make sure to pick one based on your own needs.
Not sure what those needs are? Below we have our buyer’s guide, which is designed to give you all the information you’ll need about filter systems.
This will help you make a very informed decision.
Buyer’s Guide
Filter systems may not seem like they’ve got much to them, but they’re a lot more complicated than you’d expect. They’ve even got their terminology.
It can be tricky knowing what’s important and what’s jargon, so we’ve put this guide together to clear up any confusion.
Different Types Of Water Filtering Systems
There are different types of water filtration systems. All of these are designed to filter the bacteria and dirt from water, but they each have their unique properties.
Here are some of the systems below.
Distillation System
A distillation system uses heat to separate the water into its components.
Distillation uses steam to boil the water. The steam condenses back down into liquid form. This liquid is then collected and stored in a tank.
Distillation systems use less energy than other methods. But, they require a large amount of space. In addition, they produce a significant amount of waste heat.
Distillation systems are good at removing chlorine and chloramines. They also remove heavy metals such as lead and mercury. Lead and mercury are often found in older plumbing.
Distillation systems are usually cheaper than other methods. However, they still require a lot of energy.
They also tend to be noisy, so if you want to keep your neighbors at bay, you might want to consider installing a quieter version instead.
Reverse Osmosis
A reverse osmosis system uses pressure to force water through a membrane. The membrane prevents the contaminants from passing through. This is why it’s called “reverse” osmosis.
Reverse osmosis systems remove many impurities from the water, including salt, minerals, and chemicals.
Some other things which cannot pass through the membrane include bacteria, parasites, and viruses.
These water molecules are filtered out.
The result is purer water. Reverse osmosis systems are considered to be the most effective way to purify water.
However, they are extremely expensive. And, they take up a lot of space.
Reverse osmosis systems remove 99% of bacteria, viruses, and parasites. They also remove heavy metals such as lead and mercury.
However, they do not remove chlorine and chloramines. So, if you plan on drinking the water, you should get a separate distillation system.
The quality of the water produced by a reverse osmosis system is excellent. It’s safe to drink. It has no odor. And, it doesn’t leave any residue behind.
Filtration System
A filtration system generally consists of two parts. One part contains the actual filtering material. The second part contains the housing.
The filtering material is placed inside the housing. When water passes through the housing, it comes into contact with the filtering material.
The filtering material catches contaminants. Then, it releases clean water.
Water enters the housing. It flows through the filtering material. The contaminants are trapped by the filtering material. Clean water exits the housing.
Filtering systems come in many shapes and sizes. There are small ones for home use. And, there are huge industrial versions too.
Carbon Water Filters
Carbon water filters are filters that use activated carbon.
Activated carbon is also sometimes called activated charcoal. If you’ve ever gone on a tooth whitening craze, then you’ll be familiar with activated charcoal.
Activated charcoal/carbon is excellent at filtering out contaminants and purifying water. A carbon water filter does this by essentially absorbing all the contaminants.
Carbon water filters work by passing water through a bed of activated carbon. The benefits of a carbon water filter, over other filters, are as follows:
- This process removes bad tastes and odors. It reduces the amount of chlorine in your tap water.
- It helps reduce the risk of getting sick from contaminated water.
- It can help prevent stomach upset.
- It can reduce the chances of developing cancer.
- It can help reduce allergies.
- It can improve skin conditions.
- It can even treat diarrhea.
UV Water Purifying System
UV (Ultra-Violet) light is a type of light that is known for killing bacteria. These are great at killing bacteria without requiring harsh chemicals or long filtration processes.
A UV purifying system uses ultraviolet light to kill bacteria. This kills bacteria before it reaches the point where they can cause harm.
UV water purification systems work by exposing water to ultraviolet light. Ultraviolet light is invisible to humans, but it can destroy harmful microorganisms.
When water passes through an ultraviolet light source, it becomes exposed to the light. The light destroys the microorganisms in the water.
Ultraviolet light disinfects water. It does so very quickly. It takes just seconds for the water to become completely free of harmful organisms.
UV water purifier systems are highly efficient. They require only a fraction of the energy required by conventional methods.
Which Type Is Right For You?
You should choose a size that fits your needs. Small homes don’t need big systems. On the other hand, large businesses do need larger systems.
Wells would do better with filtration systems rather than distillation or reverse osmosis. This also means that if you see reverse osmosis as part of a filtration system upgrade, you won’t necessarily need it.
Water Filter Faucets
As water filters become increasingly popular, more and more upgrades and accessories are being introduced into the market.
Some of them are just a marketing ploy, while others are useful.
A water filter faucet is one such accessory. It’s a faucet with a built-in water filter. As you might have guessed, these are usually installed in bathrooms.
The main benefit of having a water filter faucet installed in your well or home is that it will make sure that you get clean drinking water every time you turn on the tap.
There are two types of water filter faucets available. One has a separate tank for storing the water. While the other has a built-in water filter cartridge. They both work very well.
Water Contamination Type
Not all contaminated water is contaminated in the same way.
Some water can have chemical contamination, while other water might have sedimentary contamination- where bits of dirt and rocks get in the water. Not all chemical contamination is the same either.
Some water might be contaminated with lead or iron, whereas another might host an unholy group of viruses. Both are technically classified as chemical contamination.
The type of contamination in your water will affect the kind of filter you should buy.
If you’re looking for a filter that removes heavy metals like lead, then you’ll want to look for a ceramic or carbon block filter.
If you’re looking for a water filter that removes viruses, then you’ll want a UV light filter.
In addition, some contaminants are harder to remove than others. For instance, iron and lead are easier to remove than viruses.
Gravity Fed Systems Vs. Pressurized Systems
The first thing to consider when choosing a water filtration system is whether you are looking for a gravity-fed system or a pressurized system.
Gravity feed systems are typically easier to install and operate as compared to pressure systems.
Gravity feed systems consist of a collection container at the bottom of the well and a separate storage reservoir.
These containers collect the water from the well and store it until it can be used.
Pressure systems rely on a pump to force the water from the well to the storage reservoir. Pressure systems tend to be more expensive and complicated to install and operate.
If you’re planning on installing a new well, you should probably choose a gravity-fed system. Otherwise, you should look for a gravity-fed system that has an integrated storage reservoir.
After deciding between gravity-fed and pressure systems, you need to decide how much space you have in your yard. A well water filtration system requires a certain amount of room around the well itself.
A good rule of thumb is to plan on at least 3 feet of clearance around the well. This means that the well must be at least 6 feet deep. You also need enough room for the storage reservoir.
You should also plan on having enough room for the water line that connects the well to the house. The diameter of this pipe depends on the size of your well.
You should also check if there is sufficient space for plumbing connections. Your local plumber can help you determine what size pipes you need.
Well Water Filtration System Installation Tips
Once you’ve decided what type of water filtration system you want, you need to figure out how to install it. Well water filtration systems come in different shapes and sizes.
Depending on the size of your home, you may need to hire a professional plumber to install the system.
It’s important to note that most well water filtration systems require a permit. This may depend on your state so be sure to check the guidelines first.
When buying a well water filtration unit, make sure that you get one that is rated for use in your area. Most units sold today are designed for use in colder climates.
Frequently Asked Questions
A buyer’s guide can only go so far to help. Sometimes you have questions that just won’t go away. Sometimes the more you read, the more questions you have, and the more confused you can become.
We’d like to help you avoid that.
Here in our FAQs, we’ve got some of the most asked questions when it comes to water filtration systems.
But questions are all well and good, what about answers? Well, we’ve got those too. So read on to turn that confused frown upside down.
What Is A Water Filtration System?
A water filtration system is essentially a device that helps you get clean drinking water. The device itself doesn’t purify the water. Instead, it simply allows you to see through the impurities in the water.
It does this by using a combination of physical and chemical processes.
These processes include:
- Filtration
- Sedimentation
- Chlorination
- Carbon Filtering
- Ionization
- Reverse Osmosis
- Distillation
How Does A Water Filtration System Work?
When you first start using a water filtration system, you may notice that the taste isn’t quite right. That’s because the water still contains some impurities.
These impurities come from things like:
- Dirt
- Lead
- Iron
- Bacteria
- Viruses
But once you install the filter, you’ll soon realize that the taste is much improved. And that’s because the water now has fewer impurities.
You’ll know that the water is getting cleaner when you see a drop in its turbidity level. This means that fewer particles are floating around in the water.
You’ll also notice that the water is clearer. That’s because the filter is removing suspended solids. It also makes the water safer to drink.
Why Should I Use A Water Filter?
There are many reasons why you should use a water filtration unit.
Here are a few:
Health Benefits
One of the main benefits of having a water filtration machine installed at home is that it reduces the risk of contracting certain diseases. Diseases such as cholera and typhoid fever are caused by bacteria.
Safety
Another benefit of having a water filtration system installed at home is that they make the water safe to drink.
This is especially important if you live near areas where there are high levels of pollution. In these cases, you need to be extra careful with how you treat your water.
Quality Of Life
Another reason why you should consider installing a water filtration system at home is that it improves the quality of life.
The cleaner the water that you drink is, the healthier you’ll become, the more energy you’ll have, and the clearer your mind will be!
Environmentally Friendly
The final reason why you should install water filtration units at home is that they are environmentally friendly.
They’re one of the best ways to protect the environment. For example, if you don’t have water filtration devices installed at home, then you run the risk of wasting precious resources.
Cost-Effective Solution
Finally, another reason why you should install an effective water filtration system in your home is that it’s cost-effective in the long term.
What Kind Of Filter Do You Need For A Well?
When searching for something that can clear up the water of a well, you need to choose between different types of filters.
These include carbon block filters and cartridge filters.
Carbon Block Filters
A carbon block filter works by passing the water through activated charcoal. The charcoal removes unwanted chemicals and impurities from the water.
It does this by absorbing them into the pores of the charcoal. Once the water passes through the charcoal, it leaves behind only pure water.
However, the downside to using a carbon block filter is that it doesn’t remove all of the harmful contaminants. It just absorbs most of them.
That’s because the charcoal only holds up to about 1 gram of material per square meter.
So, if you have a large tank or a deep well, then you may not get enough filtering power out of a single piece of charcoal in your filter.
That’s why it’s recommended that you use several pieces of charcoal together. This way, you’ll get more filtering power than you would with a single piece.
Cartridge Filters
On the other hand, cartridge filters work differently. They contain several tiny holes which allow the water to pass through easily.
Once the water passes through the holes, the particles become trapped inside the filter. Then, when you turn off the faucet, the water drains out of the filter and back down into the well.
Because of this design, cartridge filters do a better job of removing all of the harmful contaminants from the water. However, they also require frequent maintenance.
That’s because the cartridges eventually wear out over time.
So, if you want to ensure that your water stays clean, then you should invest in a cartridge filter.
But, if you want to avoid having to regularly maintain your filter, then you should go with a carbon block filter instead.
Which Type Is Better?
There’s no right or wrong answer here. It depends on your specific needs. If you want to make sure that your water remains safe to drink, then you should opt for a carbon block filter.
But, if you don’t mind spending some extra time maintaining your filter, then you might be better off going with a cartridge filter… It’s recommended that you use a carbon block filter for wells.
This is because cartridges work better when the water flows, like with a tap. But in a well, the water tends to remain stationary. That’s why carbon block filters are better for wells.
How Often Should You Change Your Well Water Filter?
How long you should wait to change the filter in your well filtration system depends on the type of system you’ve settled on, but generally speaking, you should be switching it out every 2 to 6 months.
Inspect your filter, and see if you can make out any obvious soiling or blockages.
If there is any perceived dip in performance, it’s probably time to change it. However, if it’s a renewable design, you may be able to simply wash it, and reinstall it into your system.
That said, even reusable filters will eventually kick the bucket, so it’s best to have a spare hidden away somewhere for when that time eventually comes — you can’t be too prepared when it comes to water safety.
What Filtration System Works Best For Dealing With Bacteria?
Reverse osmosis filtration systems are renowned for their amazing ability to do away with lots of nasty bacteria, such as Salmonella, Campylobacter, Shigella, and E. coli.
Carbon filters are also considered highly effective when it comes to these harmful H2O hitchhikers.
Final Thoughts
Wells are one of the oldest ways to obtain water. But, they can be very dangerous.
That’s because wells have been known to contaminate groundwater. That’s what happens when you drink from something that’s been around for a long time.
If you’re going to install a well filtration system, you’ll need to make sure that it meets all local regulations.
In addition, you’ll need to know how to maintain it properly.
This includes making sure that the pump works correctly. Also, you’ll need to check the level regularly.
And, you’ll need to keep an eye out for leaks.
As much as we’d like to believe none of the products on here would leak, all it takes is one bad manufacturing run for a leaking filter.
Luckily most of the filtration systems on this list come with warranties and guarantees. So, should the worst happen, you’ll be covered.
Remember, for a well filtration system you should look for a carbon filter that uses a pressurized system. This is because these work best for a well’s specs.
And one more thing… Once you’ve installed your new well filtration system, you should test it periodically. This helps you identify any problems before they get worse.
